The first issue is the default theme on Skype versus the one for Ubuntu. The default theme on Skype configured menu text with dark colors and the default Ubuntu theme configures menus with dark background. This makes the menu text mostly invisible.

Luckily by moving the mouse pointer over the menu the background highlight makes the text visible.

To change this permanently select “Options” from the Skype menu on the bottom left corner of the Skype window or press CTRL+O.

On the “General” section change the style from “Cleanlooks” to “Desktop Settings”. Close and restart Skype. Now you should see the menu text clearly.

The second issue is a problem with the video camera. This might or might not happen to you. It is a known problem with a workaround on the Skype release notes:

Skype does not work well with newer version of GSPCA Webcams driver (Linux Kernel >=2.6.27), possible workaround:

• Ubuntu 32 bit: install “libv4l-0″ package and launch Skype with: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
• Ubuntu 64 bit: install “lib32v4l-0″ package and launch Skype with: LD_PRELOAD=/usr/lib32/libv4l/v4l1compat.so skype

Other distributions might have the same library, but may have a different path.

In my case I already had the package ??libv4l-0 installed. If that’s not your case, or if you’re not sure, run on a terminal window:

sudo aptitude install libv4l-0

With the library installed you cannot simply start Skype from the start menu because the variable LD_PRELOAD needs to be customized for Skype.

So you have to start it from a terminal window or change Ubuntu menu. To change Ubuntu menu do the following:

• Open the System > Preferences menu and select “Main Menu”
• On the left select the “Internet” menu and on the right select “Skype”.
• Click “Properties”.
• On “Command:” replace the default command with: bash -c “LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype”

Now every time you start Skype your video should work.

What happened was that Ubuntu install changed the master boot record (MBR) of my internal drive and set it up to load the remaining of Grub (it is split in 2 because otherwise it wouldn’t fit on the MBR) from the USB storage.

To fix this I could use the Windows tools (fixmbr) but that requires me to boot using the recovery console and login as system administrator. Although using fixmbr would restore the Windows boot loader it would erase grub and make the USB storage  not bootable.

What worked for me was MbrFix from sysint (www.sysint.no). REMARK: following the instructions below might make your computer unusable and eventually make you lose data.

First I got the list of partitions on my internal disk:

C:\>MbrFix.exe /drive 0 listpartitions
# Boot Size (MB) Type
1 Yes     76316    7  NTFS or HPFS
2             0    0  None
3             0    0  None
4             0    0  None

Next I saved my internal disk mbr to a file:

C:\>MbrFix.exe /drive 0 savembr Backup_MBR_0.bin

Next I listed my partitions on my USB disk drive:

C:\>MbrFix.exe /drive 1 listpartitions
# Boot Size (MB) Type
1          6440  131  Linux native (usually ext2fs)
2          1223  130  Prime
3             0    0  None
4             0    0  None

Now I want to put grub on my USB disk:

C:\>MbrFix.exe /drive 1 restorembr Backup_MBR_0.bin
You are about to Restore MBR,
are you sure (Y/N)? Y

Now let’s see how the partition looks like:

C:\>MbrFix.exe /drive 1 listpartitions
# Boot Size (MB) Type
1 Yes     76316    7  NTFS or HPFS
2             0    0  None
3             0    0  None
4             0    0  None

Ups! what happened there? My Linux partitions are gone… Let me try and fix this…

C:\>MbrFix.exe /drive 1 /partition 1 setpartitiontype 131
You are about to Set partition type,
are you sure (Y/N)? Y
Partition 1, type before: 7 NTFS or HPFS
Partition 1, type after: 131 Linux native (usually ext2fs)

C:\>MbrFix.exe /drive 1 /partition 2 setpartitiontype 130
You are about to Set partition type,
are you sure (Y/N)? Y
Partition 2, type before: 0 None
Partition 2, type after: 130 Prime

C:\>MbrFix.exe /drive 1 listpartitions
# Boot Size (MB) Type
1 Yes     76316  131  Linux native (usually ext2fs)
2             0  130  Prime
3             0    0  None
4             0    0  None

Looks like by setting the partition types back to their original values solved the problem.. yes it did.. ufff…

Now let’s restore the original Windows boot loader on the internal disk:

C:\Documents and Settings\machados\My Documents\Downloads>MbrFix.exe /drive 0 fixmbr
You are about to Fix MBR,
are you sure (Y/N)? Y

Now I could boot the system without the USB disk connected to my laptop.

I could also boot my Linux system by connected the USB disk and selecting “boot from usb storage” from my bios boot menu.

To be able to enjoy seamless integration between the host operating system and the VirtualBox guest you have to install VirtualBox Additional Tools on the guest operating system.

To do so, follow the steps:

Ensure you have a working Internet connection.

Step 1:

Install requirements for the Additional Tools:

sudo apt-get install gcc linux-source-virtual linux-headers-virtual dkms

Reboot after installation.

Step 2:

After logging in again find the Install Additional Tools option on the Devices menu.

Then on your guest mount the cdrom:

sudo mount /media/cdrom

Step 3:

Now install the tools:

cd /media/cdrom

./VBoxLinuxAdditions-x86.run

This will install the additional tools for virtual box.

Reboot your system and you’re all set.

My laptop has 2 limitations. One, it doesn’t have a CD-ROM drive. Second, it only has 3 USB ports. I got a Pioneer DVR-XD09 external hard drive. This drive takes 2 USB ports because of power requirements and that means that if I boot from the live CD I only have 2 remaining port for other external drive.

So I did the following:

Step 1:

Boot from the 4GB USB installation. Install gparted using Ubuntu Software Center from Applications menu.

Delete any partition  existing on the 8GB USB drive using gparted. Make sure you select the correct drive.

Step 2:

Boot Ubuntu Live CD 9.10.

Step 3:

Mount the internal hard drive. It has enough space for an image of the USB installation.

Step 4:

Plug in the USB where the system is installed (4GB) . Unmount it.

Step 5:

Make an image to the internal harddrive with the dd command:

dd if=/dev/sdc/ of=/media/internal_drive/ubuntu-image

Step 6:

Unplug the 4GB USB drive. Plug in the 8GB USB drive. Unmount it.

Step 7:

Copy the Ubuntu image to the 8GB USB drive using dd:

dd if=/media/internal_drive/ubuntu-image of=/dev/sdc

Step 8:

Boot the system from the 4GB USB drive.

Plug the 8GB drive. Using gpartd remove the swap drive on the 8GB drive.

Use uuidgen and tune2fs to change the uuid of the root partition on the 8GB drive:

$ sudo -i

# uuidgen
0b2eaab8-fddb-41fc-85f9-12ff421ce984

# tune2fs -U 0b2eaab8-fddb-41fc-85f9-12ff421ce984 /dev/sdc1

Step 9:

Open gparted (or click Refresh Devices from GParted menu if you didn’t close GParted on last step).

Select the 8GB device. Select partition 1 (/dev/sdc1 in my ca.se). Press the mouse right button and select resize/move.

Drag the right edge of the partition until your happy with the free space for the swap partition. I left 1.20 GiB for the swap partition.

Right-click the unallocated space and select New.

On File System select linux-swap and press Add.

Back to GParted main window Apply the changes.

Close GParted.

Step 10:

Mount the new root partition using the Ubuntu Places menu.

On a terminal window change to the etc folder on that partition:

$ sudo -i

# cd /media/0b2eaab8-fddb-41fc-85f9-12ff421ce984/etc/

Check the previous UUID values on fstab:

# cat fstab | grep UUID=
# for a device; this may be used with UUID= as a more robust way to name
UUID=4c557514-3b1e-47b2-ad53-475e26f0e520 / ext4 errors=remount-ro 0 1
UUID=1042ef8e-bcf0-4890-a5b0-fe24a1aec625 none swap sw 0 0

Backup your fstab:

# cp fstab fstab.old

Get the new values:

# blkid /dev/sdc1
/dev/sdc1: UUID=”0b2eaab8-fddb-41fc-85f9-12ff421ce984″ TYPE=”ext4″
# blkid /dev/sdc2
/dev/sdc2: UUID=”d8989008-f39c-42f4-81ad-5c1a70c8b3c9″ TYPE=”swap”

Replace the old values for the new ones:

# sed ’s/4c557514-3b1e-47b2-ad53-475e26f0e520/0b2eaab8-fddb-41fc-85f9-12ff421ce984/’ fstab.old > fstab

# sed ’s/1042ef8e-bcf0-4890-a5b0-fe24a1aec625/d8989008-f39c-42f4-81ad-5c1a70c8b3c9/’ fstab > fstab.new

Now your fstab should have the new values:

# cat fstab | grep UUID=
# for a device; this may be used with UUID= as a more robust way to name
UUID=0b2eaab8-fddb-41fc-85f9-12ff421ce984 / ext4 errors=remount-ro 0 1
UUID=d8989008-f39c-42f4-81ad-5c1a70c8b3c9 none swap sw 0 0

Step 11:

Now you need to install GRUB on the 8GB USB drive.

First, the UUID of the root partition needs to be corrected also:

# cd ../boot/grub

# cp grub.cfg grub.cfg.old

# sed ’s/4c557514-3b1e-47b2-ad53-475e26f0e520/0b2eaab8-fddb-41fc-85f9-12ff421ce984/’ grub.cfg.old > grub.cfg

Install grub on 8GB USB device:

First check if sdc is on device.map:

# cat device.map
(hd0) /dev/sda
(hd1) /dev/sdb

Add the missing device:

# echo “(hd2) /dev/sdc” >> device.map

# grub-setup -d ./ -r ‘(hd1,1)’ -m ./device.map ‘(hd2)’

# grub-install –root-directory=/media/0b2eaab8-fddb-41fc-85f9-12ff421ce984/ /dev/sdc

Step 12:

Shutdown the system. Remove the 4GB drive and plugin the 8GB drive.

Turn on the system.

Now I have 50% of free space instead of the 5% I had before migrating my system from an 4GB USB drive to an 8GB  USB drive.

Step 1:

Download Flex SDK 3.4 to your computer.

Step 2:

Extract to c:\flex_sdk_3.4

Step 3:

Browse to C:\flex_sdk_3.4\runtimes\player\10\win and run:

Install Flash Player 10 ActiveX.exe

Install Flash Player 10 Plugin.exe

Step 4:

Browse to C:\flex_sdk_3.4\samples\explorer

Step 5:

Run build.bat

This will take a while because it will recursively compile all mxml files.

Step 6:

Run explorer.html

Experiment with the samples provided.

Step 7:

Let’s create an hello world application. Using an editor of your choice create a text file and save it as “helloworld.mxml” – the directory doesn’t really matter but let’s say c:\helloworld\.

Step 8:

Copy the following xml text into the helloworld.mxml file.

<?xml version=”1.0″ encoding=”utf-8″?>
<mx:Application xmlns:mx=”http://www.adobe.com /2006/mxml”>
<mx:HBox>
<mx:Label text=”Hello World from Flex!”/>
</mx:HBox>
</mx:Application>

Step 9:

Compile your mxml file into an swf file using the following command at the command prompt:

C:\flex_sdk_3.4\bin\mxmlc.exe helloworld.mxml

Step 10:

Run your swf file. The Flash player should open and execute your file. Your “Hello World from Flex” message will show up.

References:

http://livedocs.adobe.com/flex/3/html/

http://www.adobe.com/support/documentation/en/flex/

I thought this would be a driver issue of the laptop so I was ready to find a new driver for this network card.

So I opened Control Panel and System Properties. Then I clicked the Hardware tab and opened Device Manager.

At Device Manager I expanded Network Adapters tab and selected the ethernet controller of my laptop. I right clicked it and opened the properties window. My initial purpose was to find the driver version but I started looking at the settings.

So I selected the Advanced tab and eventually Speed & Duplex. Wait.. why is it set to 100 Mb Full? Hummm…. let me change that to Auto. Bingo… After applying the change I got a 1.0Gbs connection…

What is this for? By checking that the checksum of the downloaded file matches the checksum provided on the source web site you’ll have a guarantee that the file was not modified (hacked) – unless the web site checksum was too..

So on windows how do you verify this?

There’s a tool (fciv.exe) provided by Microsoft(r) that can compute sha1 and md5 checksums. You can download it at http://support.microsoft.com/kb/841290.

After downloading it, you can extract it to c:\windows\ to make the command widely available.

Next you can verify the checksum of a downloaded file, say for example the gnupg installation package for windows. On the web site the sha1 checksum was published. Let’s verify it:

C:\external\Software\gnupg>fciv gnupg-w32cli-1.4.9.exe -sha1
//
// File Checksum Integrity Verifier version 2.05.
//
c2efad983dfe50e6d8007257bad2c76604be389a gnupg-w32cli-1.4.9.exe

Great, it matches it so the file has it’s integrity intact.

To make things easier we can create the commands sha1sum and md5sum which are normally the standard command names to check sha1 and md5.

Let’s create 2 batch files, for sha1 let’s put the following contents and save it as c:\windows\sha1sum.bat:

@echo off
fciv %1 -sha1

and for md5 let’s put the following contents and save it as c:\windows\md5sum.bat:

@echo off
fciv %1

Now we can compute the checksums by calling these commands:

C:\external\Software\gnupg>sha1sum gnupg-w32cli-1.4.9.exe
//
// File Checksum Integrity Verifier version 2.05.
//
c2efad983dfe50e6d8007257bad2c76604be389a gnupg-w32cli-1.4.9.exe

C:\external\Software\gnupg>md5sum gnupg-w32cli-1.4.9.exe
//
// File Checksum Integrity Verifier version 2.05.
//
d90854104edcb72149472a99a9392d4e gnupg-w32cli-1.4.9.exe

Use the command shutdown (open an command prompt: Start > Run > cmd):

shutdown -s -f -t 3600

The command above shuts down your computer in 1 hour closing any running application.

Look at windows help for the complete synopsis of the command.

When I time a long command for some reason the cursor at some point moves over to the beginning of the same line overwriting the command and everything becomes a mess. This is specially annoying while typing something you would like to cut and paste on an email for example.

So, what’s going on?

Bash has a variable that reports the number of columns setup:

$ echo $COLUMNS
80

Interesting, it is configured for 80 columns but my terminal window has 137 columns. Why is that?

There’s a Bash setting that will adapt the window size after each command:

checkwinsize

If set, Bash checks the window size after each command and, if necessary, updates the values of LINES and COLUMNS.

Let’s see what is it’s current value:

$ shopt -p | grep checkwinsize
shopt -u checkwinsize

That means it is disabled… Let’s enable it:

$ shopt -s checkwinsize

Now it is enable. Let’s check the COLUMNS value now:

$ echo $COLUMNS
137

Great!

To change the configuration file /etc/cluster/cluster.conf you have to follow the steps outlined below on the first node of your cluster:

1. backup current cluster.conf
2. copy /etc/cluster/cluster.conf to say /tmp/cluster.conf
3. make the necessary changes to /tmp/cluster.conf
   1. Change also the config_version attribute of the cluster tag at line 2 increasing the value by 1.
4. run ccs_tool with the update option:  ccs_tool update /tmp/cluster.conf
5. if you’re using cman then run: cman_tool version -r <new config version>

If you don’t do item 5. and you’re using cman then your nodes will not be able to rejoin the cluster. To recover do the following:

1. On the first node run cman_tool version -r <new config version>.
2. On the other nodes restart the cman service.
3. Restart ccsd
4. Start rgmanager